Kyocera FS-6700 - Manual (Page 187)

B-2
B.1. General Guidelines
B.1.General Guidelines
Although the page printer is designed for printing on standard dry PPC photocopier copy paper
(standard paper), it can print on various types of paper that conforms to the specifications given in
this chapter.
Select paper carefully as use of paper inappropriate for the printer may result in paper jams or
wrinkling of output paper. Low-quality paper may reduce printing quality, not only wasting paper
but possibly leading to damage to the printer. It is possible to achieve efficient printing with few
problems and minimize the risk of printer damage or wear by following the precautions listed
below.
Usable Paper
Be sure to use copy paper (standard paper) used in standard dry PPC photocopiers.
Note
Some recycled paper does not meet the necessary specifications of Table B.1. for use in this
printer due to conditions such as stored water and pulp content. Before purchasing recycled
paper, test a sample on the printer and check that printing quality is satisfactory. Be sure to select
a brand of recycled paper which offers good printing quality and does not contain excessive levels
of paper dust.
There are differences in grade between each paper manufacturer, and these differences can affect
printer operations. Satisfactory printing results cannot be obtained through the use of poor-quality
paper. Even inexpensive paper may turn out to be uneconomical from a result standpoint if its
quality is inappropriate for the printer.