Dumping received data, Dumping received data -30, Selecting dump received data mode – Kyocera FS-6700 User Manual
Page 99
2-30
2.8. Dumping Received Data
It is possible to print data received by the printer as hexadecimal code for the purposes of
debugging programs and files.
Selecting Dump Received Data Mode
1. Pressing the MODE key will put the printer in Mode Select mode.
2. Press + or – to select
Others >
.
3. Press the
key.
4. Press the + key several times to display
>Print HEX-DUMP
and press the ENTER key. A
?
will be displayed.
5. Press the ENTER key again and
>Processing
will be displayed for awhile followed by
Waiting
.
6. Send the data to be dumped to the printer. The printer will display
Processing
while it
receives the data.
7. Once all data has been received, the message
Waiting
will appear. Press the FORM FEED
key to finish printing.
Once the dumped data you require has been output, it is possible to cancel the printing of any
further dumped data by taking the printer offline by pressing the ON LINE key and then press-
ing the CANCEL key.
2.8. Dumping Received Data