Kyocera FS-6700 - Manual (Page 53)

1-28
13. Set the Emulation Mode
The printer emulates the operation of five other printers. It is factory-set to emulate the HP
LaserJet 5M at power-up. If you primarily use software that supports HP LaserJet 5M, or that
supports the Kyocera printer itself, the factory setting is the one you want. If you primarily use
software that supports another printer, it is convenient to change the printer’s power-up emulation
mode.
The emulation mode can be changed from the printer control panel. To change the emulation
mode, refer to the Mode Select Menu diagram on the last page of this manual.
14. Install the Printer Driver
Printer drivers are provided for using the printer with Windows 3.1 or Windows 95. Use the Kyocera
Digital Library CD-ROM supplied with the printer, or use the one supplied with Windows 3.1 or
Windows 95. To install the printer driver, proceed as follows. Reference to the Windows manual is
also recommended.
Windows 95
1. Click the Start button, point to Settings, and then Printers.
1.4. Setting Up and Interfacing
Start Button