Kyocera FS-6700 - Manual (Page 48)

1-23
Chapter 1 Installing the Page Printer
7. Open the Paper Stopper on the Face-down Output Tray (if required)
Open the paper stopper as shown below.
Note
Depending on the paper, printing without opening the paper stopper may result in more evenly
aligned output. Decide whether or not to use the paper stopper after checking the output condition
of paper.
8. Install the Face-up Output Tray (sold separately)
Use the separately sold PT-3 face-up output tray if you want the printed pages stacked face-up
(reverse order). Install the face-up output tray as shown in the figure.
Paper Stopper
Face-up Output Tray (PT-3)