Proxim ORiNOCO AP-700 - Manual (Page 101)

Performing Advanced Configuration AP-700 User Guide
SSID/VLAN/Security
101
NOTE
If you have two or more SSIDs per interface using a security Profile with a security mode of Non Secure, be aware that security being
applied in the VLAN is not being applied in the wireless network.
13. Define the RADIUS Server Profile Configuration for the VLAN/SSID:
• RADIUS MAC Authentication Profile
• RADIUS EAP Authentication Profile
• RADIUS Accounting Profile
If 802.1x, WPA, or 802.11i security mode is used, the RADIUS EAP Authentication Profile must have a value.
A RADIUS Server Profile for authentication for each VLAN shall be configured as part of the configuration options for that VLAN. RADIUS
profiles are independent of VLANs. The user can define any profile to be the default and associate all VLANs to that profile. Four profiles are
created by default, “MAC Authentication”, “EAP Authentication”, Accounting”, and “Management”.
14. Reboot the AP.
Adding or Modifying an SSID/VLAN with VLAN Protocol Enabled
1. Click SSID/VLAN/Security > Wireless-A or Wireless-B.
This tab allows you to select the index of the SSID/VLAN to be added or edited. It also allows you to configure the RADIUS Authentication
Status, the MAC ACL Status, the Security Profile for the VLAN, the RADIUS Server Profiles, and gives you the option to enable or disable
RADIUS accounting and SSID authorization in the VLAN.
2. Select the Enable Security Per SSID option. The screen will update to the following:
Figure 4-44 SSID/VLAN Configuration (VLAN Protocol Enabled)
3. Click Add to configure additional SSIDs, VLANs, and their associated security profiles and RADIUS server profiles, or click Edit to modify
an existing VLAN/SSID.