Proxim ORiNOCO AP-700 - Manual (Page 35)

AP-700 User Guide
35
4
Performing Advanced Configuration
• System : Configure specific system information such as system name and contact information.
• Network: Configure IP settings, DNS client, DHCP server, DHCP Relay Agent, DHCP Relay Servers, and Link Integrity.
• Interfaces: Configure the Access Point’s interfaces: Wireless and Ethernet. Configure a Wireless Distribution System (WDS) .
• Management: Configure the Access Point’s management Passwords, IP Access Table, and Services such as configuring secure or
restricted access to the AP via SNMPv3, HTTPS, or CLI. Configure Secure Management, SSL, Secure Shell (SSH), and RADIUS Based
Access Management.
Set up Automatic Configuration for Static IP .
• Filtering: Configure Ethernet Protocol filters, Static MAC Address filters, Advanced filters, and Port filters.
• Alarms: Configure the Alarm (SNMP Trap) Groups, the Alarm Host Table, and the Syslog features.
• Bridge: Configure the Spanning Tree Protocol, Storm Threshold protection, Intra BSS traffic, and Packet Forwarding.
• QoS : Configure Wireless Multimedia Enhancements/Quality of Service parameters and QoS policies.
• Radius Profiles: Configure RADIUS features such as RADIUS Access Control and Accounting.
• SSID/VLAN/Security: Configure up to 16 VLAN and SSID pairs, and assign Security and RADIUS Profiles for each pair. Configure
security features such as MAC Access Control, WPA, WEP Encryption, and 802.1x.
To configure the AP using the HTTP/HTTPS interface, you must first log in to a web browser. See Logging into the HTTP Interface for
instructions.
You may also configure the AP using the command line interface. Refer to
Using the Command Line Interface (CLI) for more information.