Proxim ORiNOCO AP-700 - Manual (Page 163)

Using the Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
163
802.11a Only Parameters
Note 1: Super Mode must be enabled first on the wireless interface before Turbo Mode can be enabled.
Name Type Values Access CLI Parameter
Operating Frequency Channel Integer Varies by regulatory
domain and country. See
802.11a Channel
Frequencies
RW channel
Supported Data Rates Octet String See Transmit Rate ,
below
R suppdatarates
Transmit Rate Integer32 0 - Auto Fallback
(default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec RW txrate
Physical Layer Type Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a R phytype
SuperMode Integer enable
disable (default) RW supermode
TurboMode Integer enable
disable (default) RW turbomode