Proxim ORiNOCO AP-700 - Manual (Page 80)

Performing Advanced Configuration AP-700 User Guide
QoS
80
Figure 4-27 Add QoS Policy
5. Enter the Policy Name.
6. Select the Policy Type:
– inlayer2: inbound traffic direction, Layer 2 traffic type
– inlayer3: inbound traffic direction, Layer 3 traffic type
– outlayer2: outbound traffic direction, Layer 2 traffic type
– outlayer3: inbound traffic direction, Layer 3 traffic type
– spectralink: SpectraLink traffic
7. Enter the Priority Mapping Index.
For layer 2 policies, an index from the 802.1p to 802.1d mapping table should be specified. For layer 3 policies, an index from the 802.1p
to IP DSCP mapping table should be specified. No mapping index is required for SpectraLink.
8. Select whether to Enable QoS Marking.
9. Click OK.