Proxim ORiNOCO AP-700 - Manual (Page 24)

Getting Started AP-700 User Guide
Hardware Installation
24
T-Bar Ceiling Installation
Perform the following steps to mount the Dual Band REA to a T-bar ceiling:
1. Detach the Antenna Body from the Main Base.
2. Remove the Metal Plate.
3. Turn over the Bottom Plate and reinstall it on the Main Base.
4. Attach the antenna to the T-Bar and adjust/swivel it to lock on the T-Bar.
Attaching Antenna(s) to the AP-700
Perform the following steps to attach a Dual Band REA to the AP-700.
1. Press down near the center of the compartment covering and slide open the External Antenna Access compartment on the AP-700.
The compartment closer to the LED panel contains the connectors.
NOTE
There is one AP-700 model that does not provide external antenna connectors.
Figure 2-6 Opening the AP-700 Antenna Compartment