Update ap via http – Proxim ORiNOCO AP-700 User Manual
Page 115
Performing Commands
AP-700 User Guide
Update AP via HTTP
115
Update AP via HTTP
Use the Update AP via HTTP tab to download Configuration, AP Image, Bootloader files, and Certificate and Private Key files to the AP.
Once on the Update AP screen, click on the via HTTP tab.
Figure 6-3
Update AP via HTTP Command Screen
The Update AP via HTTP tab shows version information and allows you to enter HTTP information as described below.
1. Select the File Type that needs to be updated from the drop-down box. Choices include:
–
Image for the AP Image (executable program).
–
Config for configuration information, such as System Name, Contact Name, and so on.
–
SSL Certificate: the digital certificate for authentication in SSL communications.
–
SSL Private Key: the private key for encryption in SSL communications.
–
Upgrade BSPBL: the Bootloader software.
–
CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by the AP immediately
after being uploaded. Refer to
–
SSH Public Key: the public key in SSH communications. Refer to Secure Shell (SSH) for more information.
–
SSH Private Key: the private key in SSH communications. Refer to Secure Shell (SSH) for more information.
2. Use the Browse button or manually type in the name of the file to be downloaded (including the file extension) in the File Name field. If
typing the file name, you must include the full path and the file extension in the file name text box.
3. To initiate the HTTP Update operation, click the Update AP button.
A warning message gets displayed that advises the user that a reboot of the device will be required for changes to take effect.
Figure 6-4
Warning Message
4. Click OK to continue with the operation or Cancel to abort the operation.
NOTE
An HTTP file transfer using SSL may take extra time.
If the operation completes successfully the following screen appears.