Proxim ORiNOCO AP-700 - Manual (Page 164)

Using the Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
164
802.11b Only Parameters
Name Type Values Access CLI Parameter
Operating Frequency Channel Integer 1 - 14; available channels
vary by regulatory
domain/country; see
802.11b Channel
Frequencies
RW channel
Multicast Rate Integer 1 Mbits/sec (1)
2 Mbits/sec (2) (default)
5.5 Mbits/sec (3)
11 Mbits/sec (4) RW multrate
Closed Wireless System Integer enable
disable (default) RW closedsys
MAC Address PhyAddress 12 hex digits R macaddr
Supported Data Rates Octet String 1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec R suppdatarates
Transmit Rate Integer32 0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec RW txrate
Supported Frequency Channels Octet String Depends on Regulatory
Domain R suppchannels
Physical Layer Type Integer dsss (direct sequence
spread spectrum) for
802.11b R phytype
Regulatory Domain List DisplayString U.S./Canada -- FCC
Europe -- ETSI
Japan -- MKK R regdomain