Tftp server parameters, Ip access table parameters, Auto configuration parameters – Proxim ORiNOCO AP-700 User Manual
Page 170
Using the Command Line Interface (CLI)
AP-700 User Guide
Parameter Tables
170
Auto Configuration Parameters
These parameters relate to the Auto Configuration feature which allows an AP to be automatically configured by downloading a specific
configuration file from a TFTP server during the boot up process.
TFTP Server Parameters
These parameters relate to upload and download commands.
When a user executes an upload and/or download Command, the specified arguments are stored in TFTP parameters for future use. If
nothing is specified in the command line when issuing subsequent upload and/or download commands, the stored arguments are used.
IP Access Table Parameters
When creating table entries, you may either specify the argument name followed by argument value or simply entering the argument value.
When only the argument value is specified, then enter the values in the order depicted by the following table. CLI applies default values to the
omitted arguments. Due to the nature of the information, the only argument that can be omitted is the “comment” argument.
Name
Type
Values
Access
CLI Parameter
Auto Configuration
Group
N/A
R
autoconfig
Auto Configuration
Status
Integer
enable (default)
disable
RW
autoconfigstatus
Auto Config File Name
DisplayString
User Defined
RW
autoconfigfilename
Auto Config TFTP
Server IP Address
IpAddress
User Defined
RW
autoconfigTFTPaddr
Name
Type
Values
Access
CLI Parameter
TFTP
Group
N/A
R
tftp
TFTP Server IP Address IpAddress
User Defined
RW
tftpipaddr
TFTP File Name
DisplayString
User Defined
RW
tftpfilename
TFTP File Type
Integer
img
config
bootloader
sslcertificate
sslprivatekey
sshprivatekey
sshpublickey
clibatchfile (CLI Batch File)
cbflog (CLI Batch Error Log)
RW
tftpfiletype
Name
Type
Values
Access CLI Parameter
IP Access Table
Table
N/A
R
mgmtipaccesstbl
Table Index
Integer
User Defined
N/A
index
IP Address
IpAddress
User Defined
RW
ipaddr
IP Mask
IpAddress
User Defined
RW
ipmask
Comment (optional)
DisplayString
User Defined
RW
cmt
Status (optional)
Integer
enable (default)
disable
delete
RW
status