Proxim ORiNOCO AP-700 - Manual (Page 176)

Using the Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
176
Intra BSS Subscriber Blocking
The following parameters control the Intra BSS traffic feature, which prevent wireless clients that are associated with the same AP from
communicating with each other:
Packet Forwarding Parameters
The following parameters control the Packet Forwarding feature, which redirects wireless traffic to a specific MAC address:
RADIUS Parameters
General RADIUS Parameters
RADIUS Server Configuration Parameters
NOTE
Use a server name only if you have enabled the DNS Client functionality. See DNS Client for RADIUS Name Resolution .
Name Type Values Access CLI
Intra BSS Traffic Group N/A R intrabss
Intra BSS Traffic
Operation Integer passthru (default)
block RW intrabssoptype
Name Type Values Access CLI
Packet Forwarding MAC
Address Group N/A R pktfwd
Packet Forwarding MAC
Address MacAddress User Defined RW pktfwdmacaddr
Packet Forwarding
Status Integer enable
disable (default) RW pktfwdstatus
Packet Forwarding
Interface Port Integer 0 (any) (default)
1 (Ethernet)
2 (WDS 1)
3 (WDS 2)
4 (WDS 3)
5 (WDS 4)
6 (WDS 5)
7 (WDS 6) RW pktfwdif
Name Type Values Access CLI Parameter
RADIUS Group N/A R radius
Client Invalid Server
Address Counter32 N/A R radcliinvsvradd
Name Type Values Access CLI Parameter
RADIUS Authentication Table N/A R radiustbl
Table Index (Profile
Index) Integer N/A R index
Primary/Secondary
Index Integer Primary (1)
Secondary (2) R subindex
Status Integer Enable
Disable RW status
Server Address Format Integer Ipaddr
Name RW seraddrfmt
Server IP Address or
Name IpAddress
DisplayString User defined (enter an
IP address if seraddrfmt
is ipaddr or a name if set
to name; up to 254
characters if using a
name) RW ipaddr
Port (optional) Integer User Defined
1812 (default) RW port
Shared Secret DisplayString User Defined
6-32 characters W ssecret
Response Time
(optional) Integer 1 – 10 seconds
3 (default) RW responsetm