Paradyne 9788 - Manual (Page 214)

8. Troubleshooting
8-30 December 2002 9700-A2-GB20-20
Lamp Test
The FrameSaver device supports a Lamp Test to verify that all LEDs are lighting
and functioning properly. All LEDs flash or blink on and off at the same time every
1/2 second during execution of the test. When the test is stopped, the LEDs are
restored to their normal condition.
Main Menu →Test→Lamp Test
If the Test Timeout configuration option is enabled and a Test Duration is set, the
Lamp Test stops when the test duration expires. See
Test Timeout Feature on
page 8-16 for additional information.