Paradyne 9788 - Manual (Page 92)

4. Configuration Options
4-52 December 2002 9700-A2-GB20-20
Access Type
Possible Settings: Read, Read/Write
Default Setting: Read
Specifies the type of access allowed for an authorized NMS when IP address validation is
performed.
Display Conditions – This option appears for each trap manager specified in the
Number of Trap Managers configuration option.
Read – Allows read-only MIB objects access (SNMP Get command). This includes all
objects specified as either read-only or read/write in the MIB RFCs.
Read/Write – Allows MIB objects read and write access (SNMP Get and Set commands).
However, access for all read-only objects is specified as read-only.
Table 4-22. SNMP NMS Security Options (2 of 2)