Paradyne 9788 - Manual (Page 43)

4. Configuration Options
9700-A2-GB20-20 December 2002 4-3
Using the Easy Install Feature
An Easy Install screen is provided for custom configurations, but is not required for
normal installation.
The FrameSaver Easy Install feature provides minimal configuration. Once the
installation and configuration are complete, the NOC can complete unit
configuration and verify the setup.
Main Menu →Easy Install
Easy Install Screen
To access the device:
For non-managed networks: Use the TS Access DLCI to ping the unit five
times within five seconds.
For managed networks: Use the Dedicated Network Management Link that
is created.
Table 4-1, Easy Install Configuration Options , describes the entries on the Easy
Install screen.
main/easy_install 978x-xxxxx
Device Name: Node A 09/06/2002 04:02
EASY INSTALL
(9783:) DSLAM Type: Paradyne
Node IP Address: 000.000.000.000 Clear
Node Subnet Mask: 000.000.000.000 Clear
TS Access: VPI,VCI 0 , 35
Create a Dedicated Network Management Link
Ethernet Management Options Screen
(9720:) Network 1 Operating Rate (Kbps) AutoRate
(9783/9788:) Network 1 DSL Line Rate (Kbps) AutoRate
(9788 DSU:) Port-1 Port Type: V.35
(9783/9788:) Network 1 FRF.8 Encapsulation Mode Transparent
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save