Paradyne 9788 - Manual (Page 252)

B. SNMP MIBs, Traps, and RMON Alarm Defaults
B-12 December 2002 9700-A2-GB20-20
enterpriseLatency-
Restored(121) ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
An IP SLV latency value has gone
back below a threshold for a
particular Class of Service for a
path.
String:
‘Latency restored
xxx.xxx.xxx.xxx,
COS nn,
DLCI nnnn’
enterpriseMissed-
SLVDown(16) devFrExtDlciIfIndex
(devFrExt.mib)
devFrExtDlciDlci
(devFrExt.mib)
devFrExtDlciMissedSLVs
(devFrExt.mib)
devLastTrapString
(devHealthAndStatus.mib)
SLV Timeout Error Event
Threshold has been exceeded.
String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’
enterpriseMissed-
SLVUp(116) SLV Timeout Error Event has been
cleared.
String:
‘SLV up on $ifString because
SLV communication was
reestablished. Total SLV packets
lost is $numLost.’
enterprisePath-
Down(19) ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become unavailable.
String:
‘Path
xxx.xxx.xxx.xxx Down, DLCI
nnnn’
enterprisePath-
Up(20) ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become available.
String:
‘Path
xxx.xxx.xxx.xxx Up,
DLCI nnnn’
enterpriseRmon-
ResetToDefault(13) devLastTrapString
(devHealthAndStatus.mib) All RMON-related option changes
have been reset to their default
values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options to
their original settings.
String:
‘RMON database reset to defaults.’
enterpriseSelfTest-
Fail(2) devLastTrapString
(devHealthAndStatus.mib) Unit has completed
(re)initialization and a hardware
failure was detected.
String:
‘Self test failed: $
s.’
($ s is the contents of
devSelfTestResult.)
Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 3)
Trap Variable-Bindings Possible Cause