Paradyne 9788 - Manual (Page 82)

4. Configuration Options
4-42 December 2002 9700-A2-GB20-20
Table 4-19. Management PVC Options (1 of 4)
Name
Possible Settings: ASCII Text Entry
Default Setting: Initially blank
For the management PVC, specify a unique name to display on screens (e.g., Tampa).
ASCII Text Entry – Enter a unique name for the management PVC (maximum length
8 characters).
Payload Managed
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether the PVC is payload managed.
Enable – The network PVC created will be monitored for the presence of IP frames
containing the IP address specified in the Intf IP Address field. When such a frame is
identified, it is extracted from the data stream and sent to the management stack.
Disable – A normal management PVC is created using the specified DLCI or EDLCI.
Intf IP Address
Possible Settings: Node-IP-Address, Special (nnn.nnn.nnn.nnn)
Default Setting: Node-IP-Address
Specifies the Interface IP address needed to access the unit via this management PVC to
provide connectivity to an external IP network through the frame relay network.
Node-IP-Address – Defaults to the IP address contained in the Node IP Address
(see
Table 4-18, Node IP Options ).
Special (001.000.000.000–223.255.255.255) – Allows you to display/edit an IP address
for the unit’s management PVC when the IP address for this interface is different from the
node’s IP address.
Intf Subnet Mask
Possible Settings: Node-Subnet-Mask, Calculate, Special ( nnn.nnn.nnn.nnn)
Default Setting: Node-Subnet-Mask
Specifies the Subnet Mask needed to access the unit via this management PVC to
provide connectivity to an external IP network through the frame relay network.
Node-Subnet-Mask – Uses the Subnet mask contained in the Node-Subnet Mask
configuration option (see Table 4-18, Node IP Options ).
Calculate – Calculates the subnet mask created by the IP protocol based on the class of
the IP address (Class A: 255.000.000.000, Class B: 255.255.000.000, or
Class C: 255.255.255.000). Cannot be displayed or edited.
Special (000.000.000.000–255.255.255.255) – Allows you to edit/display the subnet
mask for the management PVC when the subnet mask is different for this interface.