Oid cross-references, B-19 – Paradyne 9788 User Manual
Page 259
B. SNMP MIBs, Traps, and RMON Alarm Defaults
9700-A2-GB20-20
December 2002
B-19
OID Cross-References
The FrameSaver unit supports automatic generation of RMON alarm and event
information. Each alarm sets an SNMP variable to monitor. When the threshold set
for the monitored variable is exceeded, an SNMP trap is sent and/or a log entry is
made.
See
Table B-12, History OID Cross-Reference
, for an RMON history OID
cross-reference and
Table B-13, Alarm OID Cross-Reference
, for an RMON alarm
OID cross-reference.
Table B-12. History OID Cross-Reference (1 of 4)
Object ID (OID)
1
Item
MIB/Tag
.1.3.6.1.2.1.2.2.1. . .
.1.3.6.1.2.1.2.2.1.5.I
SDSL Interface Rate
(Link Speed)
MIB: MIB II (RFC 1573)
Tag: ifSpeed
.1.3.6.1.2.1.2.2.1.10.I
All DLCI + LMI Rx Octets
MIB: MIB II (RFC 1573)
Tag: ifInOctets
.1.3.6.1.2.1.2.2.1.11.I
Received Frames
MIB: MIB II (RFC 1573)
Tag: ifInUcastPkts
.1.3.6.1.2.1.2.2.1.16.I
All DLCI + LMI Tx Octets
MIB: MIB II (RFC 1573)
Tag: ifOutOctets
.1.3.6.1.2.1.2.2.1.17.I
Sent Frames
MIB: MIB II (RFC 1573)
Tag: ifOutUcastPkts
.1.3.6.1.2.1.2.10.32.2.1. . .
.1.3.6.1.2.1.10.32.2.1.4.I.D
Rx FECNs
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitReceivedFECNs
.1.3.6.1.2.1.10.32.2.1.5.I.D
Rx BECNs
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitReceivedBECNs
.1.3.6.1.2.1.10.32.2.1.6.I.D
Tx Frames
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitSentFrames
.1.3.6.1.2.1.10.32.2.1.7.I.D
Tx Octets
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitSentOctets
.1.3.6.1.2.1.10.32.2.1.8.I.D
Rx Frames
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitReceivedFrames
.1.3.6.1.2.1.10.32.2.1.9.I.D
Rx Octets
MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitReceivedOctets
1
D = DLCI number
H = Host control index
I = Interface ID for the frame relay link
N = Additional numeric index used by tables, like frame/burst size
P = Protocol index
T = Time mask