NCR S10 User Manual

Page 100

Advertising
background image

Using the System Utilities
Using the EISA Configuration Utility

5-14

NCR S10 Desktop Server User Guide

If your system comes configured with 16 MB or
more of system memory, and your system is not
configured with an add-on card that requires the use
of memory in the 15-16 MB range, select 16 MB Ext
Memory with 15-16 MB System Used.

If your system comes configured with 16 MB or
more of system memory, and your system is
configured with an add-on card that requires the use
of memory in the 15-16 MB range, select 16 MB Ext
Memory with 15-16 MB Add-On Card Used.

5.

After making the appropriate selection, press
[Enter]. You are returned to the system baseboard
configuration screen.

6.

If your system is configured with more than 16 MB
of system memory, press [Control] + [R] to select 16
- 64 MB Extended Memory - - - - - - - CTRL-R to add
the Memory.

7.

Observe the following memory configuration
screen:

Memory Address (-) 16 M

Type: SYSTEM

Size

0

(value between 0 - 48M,

in increments of 4M)

8.

Tab to the size (amount of memory in range) field.

If your system has 64 MB or more of system
memory, enter 48M.

Advertising