NCR S10 User Manual

Page 57

Advertising
background image

Using the BIOS Setup Utility

Basic System Configuration

NCR S10 Desktop Server User Guide

4-5

2.

Press the [Page Down] key to move to the next
page, or press the [Page Up] key to return to the
previous page.

3.

After you select the desired option for a given
parameter, press the appropriate arrow key to
highlight the next parameter. This option is now set
as the configuration value.

Figure 4-3 shows Page 2 of the Basic System
Configuration menu.

Basic System Configuration

Enhanced IDE Features

Hard Disk Block Mode
Advanced P10 Mode
Hard Disk Size > 504MB
Hard Disk 32 Bit Access

Num Lock After Boot

Memory Test
Auto Config Mode
Fast Boot Mode

Communication Settings

Baud Rate
Parity
Stop Bits
Data Lengths

[9600] BPS
[None]
[1] Bits
[8] Bits

[Disabled]
[Disabled]
[Disabled]
[Disabled]

[Enabled]

[Enabled]
[Disabled]
[Disabled]

= Move Highlight Bar,

PgDn/PgUp = Move Screen,

F1 = Help,

Esc = Exit

= Change setting,

Page 2/2

To use the Help option, press [F1]. A window displays
on the screen with a brief description of the currently
highlighted parameter.

The following sections explain the different parameters
and their settings.

Figure 4-3
Basic System Configuration Menu
(Page 2 of 2)

Advertising