NCR S10 - Manual (Page 98)

Using the System Utilities
Using the EISA Configuration Utility
5-12 NCR S10 Desktop Server User Guide
The configuration options are used to do the following:
•
Change resources or functions especially when
resource conflicts occur
•
Print configuration data about an installed board or
the entire system
•
Lock a configuration with the current settings; for
example, the board resources are locked in the
system and do not change when you add new
boards to the system
•
Solve resource conflicts on a computer with locked
boards
At the top of the screen is a bar listing pull-down
menus. Use the pull-down menus to enter configuration
data about your computer. As you enter information,
the entries are verified (when Auto Verify is turned on).
If the utility finds any resource conflicts, you must
correct the errors by changing function and resource
choices. When there are no resource conflicts, the
configuration information is saved in an SCI file.
The bottom of the screen shows a line that contains a list
of the keys you can use. You can get help information
about a selection on a menu or any object on a screen by
pressing [F1] while your cursor is on the selection or
object.
You can also display help information from the Help
Topics Index by selecting Help Topics from the Help
pull-down menu or by pressing [Shift] + [F1].