NCR S10 - Manual (Page 106)

Using the System Utilities
Using the EISA Configuration Utility
5-20 NCR S10 Desktop Server User Guide
A logo displays when the utility begins. Press any key
to display a Welcome screen. Press [Enter] to display the
main menu.
Starting the Configure Computer Selection from
MS-DOS
You can bypass the main menu, and start the Configure
Computer selection directly from MS-DOS. This permits
the use of command line parameters to customize the
operation of the utility. You must have MS-DOS and
this utility installed on your fixed disk.
Type “[d:][path]CF[/B][/H][/K][/M][/N][/T][/F]” at
the DOS prompt to start the selection from MS-DOS.
Items in brackets are optional and only the information
within the brackets is entered.