NCR S10 - Manual (Page 39)

Installing the System
Installing Drives
NCR S10 Desktop Server User Guide 2-21
To install a 5.25-inch peripheral drive, follow these
steps:
1. Unplug all cables connected to the drives.
2. Locate the two holding tabs that attach the drive
housing to the system unit and push both tabs
outward, one at a time, to release the drive housing.
See Figure 2-10.
3. Carefully lift up the drive housing.
4. Detach the 3.5-inch drive frame from the 5.25-inch
disk drive housing by removing the two screws
securing the metal frames.
Installing a 5.25-inch
Peripheral Drive
Figure 2-10
Removing the Disk Drive Housing