NCR S10 - Manual (Page 131)

Sample Configurations
Sample Standard Configuration
NCR S10 Desktop Server User Guide C-11
Mouse Port [Enabled]
Keyboard Port [Enabled]
Floppy Disk Controller [Enabled]
IDE HDD Interface [Disabled]
Parallel Port [Enabled as LPT1...]
Serial Port 1 [Enabled as Serial 1...]
Serial Port 2 [Enabled as Serial 2...]
System Setting
Special System Ports [Enabled]
EISA Reserved Device [Enabled]
If a PCI adapter is configured in the system,
change Disabled to the IRQ level for the PCI adapter
installed in the slot.
4. Exit and save the configuration.
At this point the server is setup, configured, and ready
for the operating system.
*Note: