Installing drives, Installing a 3.5-inch peripheral drive – NCR S10 User Manual

Page 36

Advertising
background image

Installing the System
Installing Drives

2-18

NCR S10 Desktop Server User Guide

Installing Drives

Read the “ESD Precautions” section earlier in this
chapter before proceeding.

The system has room for six mass-storage devices,
supporting a maximum of the following:

Three 3.5- or 5.25-inch half-height drives at the front

One 3.5-inch half-height diskette drive

Two 3.5-inch half-height fixed disk drives

When unplugging cables connected to the drive, pull
the cables by their connectors to avoid breaking the
wires inside.

To install the 3.5-inch peripheral drive, follow these
steps:

1.

Unplug all cables connected to the drives.

Caution

Caution

Installing a 3.5-inch
Peripheral Drive

Advertising