Jumper settings – NCR S10 User Manual

Page 23

Advertising
background image

Installing the System

Major Components

NCR S10 Desktop Server User Guide

2-5

Figure 2-1
System Board Layout

PCI Slots

JP4

JP2

JP6

JP3

JP1

JP5

COM 1

COM 2

Parallel Port Interface

Diskette Drive Interface

Fixed Disk Drive Interface

Power Connector 1 (230 watt)

Power Connector 2

Fast SCSI-2 Interface (wide)

Fast SCSI-2 Interface (narrow)

CPU Board Slot

Power LED Connector

Hard Disk LED Connector

Fan Connectors

Turbo Reset

Connector (J23)

BIOS

PS/2

Mouse Connector

PS/2

Keyboard Connector

Speaker

Connector (J24)

EISA

Expansion Slots

You have to change the jumper settings on the system
board when you upgrade the CPU or reconfigure the
system.

To change a jumper setting, follow these steps:

1.

Remove the jumper cap from the jumper.

2.

Position the jumper cap over the two pins for the
desired setting.

Jumper Settings

Advertising