Nortel Networks Remote Gateway 50 - Manual (Page 179)

Dialing Plan configuration Page 179 of 258
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
b. Configure the RLI in LD 86 with the RLB feature.
INST x...x Insert. Up to 31 leading digits can be inserted, usually none
at the main office. Default is none.
ISPN
(YES)
NO
IP Special Number
For off-net calls
For on-net calls
CTYP
SPN
LOC
Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical
for correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES,
the CLID is based on the call type before digit manipulation.
For off-net calls (ISPN=YES)
For on-net calls (ISPN=NO)
LD 86 – Configure Route List Index. (Part 1 of 2)
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT RLB Route List data block
RLI
0-127
0-255
0-999
Route List Index to be accessed
CDP and BARS
NARS
FNP
ENTR 0-63
X Entry number for NARS/BARS Route List
Precede with x to remove
LTER NO Local Termination entry
LD 86 – Configure the Digit Manipulation Index at the main office. (Part 2 of 2)
Prompt Response Description