Nortel Networks Remote Gateway 50 User Manual
Page 60
Page 60 of 258
Bandwidth Management
553-3001-207 Standard 2.00 January 2006
— Interzone Bandwidth = maximum bandwidth usage allowed
between peer Call Servers
•
Call Server zones that will be used for Virtual Trunks with the
following properties:
— Intrazone Preferred Strategy = Best Quality (BQ)
— Intrazone Bandwidth = default (1000000)
— Interzone Preferred Strategy = Best Quality (BQ)
— Interzone Bandwidth = default (1000000)
3
Configure the IP Phone, DSP and Virtual Trunk data with the
corresponding zone numbers.
For example, for an IP Phone 2004 telephone in zone 8:
LD 11
REQ NEW
TYPE i2004
...
ZONE 8
...
Configuration using CS 1000 Element Manager
Zones are configured from the Zones web page, shown in Figure 6.
Refer to “Configuring zone parameters using CS 1000 Element Manager” on
for instructions on configuring a Network Bandwidth Management
zone, using the values given on
.