Nortel Networks Remote Gateway 50 - Manual (Page 62)

Page 62 of 258 Bandwidth Management
553-3001-207 Standard 2.00 January 2006
LD 117 Configure a new or existing Bandwidth Management zone.
Command Description
NEW | CHG ZONE <zoneNumber> [<intraZoneBandwidth> <intraZoneStrategy>
<interZoneBandwidth> <interZoneStrategy> <zoneIntent> <zoneResourceType>]
Configure a new zone (NEW) or change (CHG) an existing zone,
where:
• zoneNumber = 0-255
• intraZoneBandwidth = Available intrazone bandwidth (Kbit/s);
Nortel recommends this value be set to the maximum value.
• intraZoneStrategy = BB (Best Bandwidth) or BQ (Best
Quality); Nortel recommends this value be set to BQ.
• interZoneBandwidth =
— For Call Server zone = Maximum bandwidth usage (in
Kbit/s) allowed between peer Call Servers
— For Virtual Trunk zones = 1000000 (Kbit/s)
• interZoneStrategy = BB (Best Bandwidth) or BQ (Best
Quality); Nortel recommends this value be set to BB to
conserve interzone bandwidth.
• zoneIntent = type of zone, where:
— MO = Main Office (Call Server) zone
— BMG = Branch Media Gateway (for branch office zones)
— VTRK = Virtual Trunk zone
• zoneResourceType = resource intrazone preferred strategy,
where:
— shared = shared DSP channels (default)
— private = private DSP channels
Note: In CS 1000 Release 4.5, the zones that were described
with BMG designator stay with BMG one, all the other zones are
provided with MO designator. It is possible to update ZoneIntent
using CHG ZONE command.