Nortel Networks Remote Gateway 50 User Manual
Page 77
Bandwidth Management
Page 77 of 258
Main Office Configuration for Survivable Remote Gateway 50
Configuration Guide
Refer to Converging the Data Network with VoIP (553-3001-160) for
information on notification levels for alarms.
Configuration using Element Manager
Element Manager can be used to enable and configure the feature.
The zone must exist before it can be configured for Adaptive Network
Bandwidth Management. Refer to IP Peer Networking: Installation and
Configuration (553-3001-213) for instruction on how to create and configure
basic properties of the zone.
To configure the Adaptive Network Bandwidth Management feature, select a
zone on the Zones web page (see Figure 6 on
) and click Adaptive
Network Bandwidth Management and CAC. The Adaptive Network
Bandwidth Management and CAC web page opens, as shown in Figure 14
on
Note: Do not configure Adaptive Networks Bandwidth Management for
Zone 0 or Virtual Trunk zones.