Nortel Networks Remote Gateway 50 - Manual (Page 188)

Page 188 of 258 Dialing Plan configuration
553-3001-207 Standard 2.00 January 2006
a. Configure the DMI in LD 86 with the DGT feature.
LD 86 – Configure Digit Manipulation Index at the branch office.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT DGT Digit manipulation data block
DMI 1-999 Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is
defined by prompt MXDM in LD 86.
DEL (0)-19 Number of leading digits to be deleted.
This would normally be configured to remove the unique
non-dialable number that identifies the branch office,
configured in the ZDP property of the branch office zone in
LD 117 at the main office (step 2 on
page 177 ).
ISPN NO IP Special Number
INST x...x Insert. Up to 31 leading digits can be inserted.
CTYP
INTL
NPA
NXX
LOC
SPN
Call type used by the call. The far-end switch must
recognize this call type.
International
National
Local PSTN
UDP
Special Number