Nortel Networks Remote Gateway 50 - Manual (Page 79)

Bandwidth Management Page 79 of 258
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
Table 5
Adaptive Network Bandwidth Management and CAC fields
Field Title Field Definition
LD 117
equivalents
Enable Call Admission
Control Feature (CAC) Control the CAC feature for the zone
• Enable (check box selected)
• disable (clear the check box)
ENL ZCAC
DIS ZCAC
QoS Response Time
Increase (ZQRT) Bandwidth limit increment, as a percentage
of the QoS factor for the zone CHG ZQRT
QoS Response Time Interval
(ZQRTI) Time (in minutes) between bandwidth limit
increments CHG ZQRTI
Warning Alarm Threshold
(ZQWAT) A QoS value, which is lower than this value,
but higher than the Critical (Unacceptable)
Alarm Threshold, triggers a Major Alarm. CHG ZQWAT
Critical Alarm Threshold
(ZQUAT) A QoS value, which is lower than this value,
triggers an Unacceptable (Critical) Alarm. CHG ZQUAT
R Alarm Coefficient (CR) The R (Cr) coefficient is used to calculate
the QoS value for the zone. CHG CR
Packet Loss Alarm
Coefficient (CPL) The Packet Loss (Cpl) coefficient is used to
calculate the QoS value for the zone. CHG CPL
Delay Alarm Coefficient (CD) The Delay (Cd) coefficient is used to
calculate the QoS value for the zone. CHG CD
Jitter Alarm Coefficient (CJ) The Jitter (Cj) coefficient is used to calculate
the QoS value for the zone. CHG CJ
Coefficient of QoS (CQoS) The Coefficient of QoS (CQoS) is used to
calculate the overall QoS value for the zone. CHG CQOS
Recent Validity Time Interval
(CACVT) Amount of time (in hours) for zone-to-zone
record validity. Once this interval expires,
records for unused zones are purged from
the tables. CHG CACVT