Nortel Networks Remote Gateway 50 - Manual (Page 189)

Dialing Plan configuration Page 189 of 258
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
b. Configure the RLI in LD 86 with the RLB feature.
For example, assume that the PSTN trunk is on route 18 and the
Customer number = 0.
>LD 86
REQ NEW
CUST 0
FEAT DGT
DMI 18
DEL 3 Set to remove ZDP added in the main office
LD 86 – Configure Route List Index.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT RLB Route List data block
RLI
0-127
0-255
0-999
Route List Index to be accessed
CDP and BARS
NARS
FNP
ENTR 0-63
X Entry number for NARS/BARS Route List
Precede with x to remove.
LTER NO Local Termination entry
ROUT
0-511
0-127
Route number of the Virtual Trunk as provisioned in LD 16.
Range for Large System and CS 1000E system
Range for Small System, CS 1000S system, Media
Gateway 1000B, and Media Gateway 1000T
...
DMI 1-999 Digit Manipulation Index number as defined in LD 86,
FEAT = DGT (step a on
page 188 ).