Nortel Networks NN10042-116 - Manual (Page 102)

102 Using the User Option menu
Prerequisites
The handset must be in standby mode.
Procedure Steps
Step Action
1 Perform one of the following options:
•
press and hold the LINE key, the User Options menu
appears, or
• while the handset is in standby state, press the Cfg soft key,
highlight System Information.
2 Use the Up and Down keys to scroll through the menu and select
Phone IPAddress.
3 Press Enter.
The IP address appears.
4 Perform one of the following:
• To return to the previous menu, press Back.
• To return the handset to standby mode, press the Power
Off/End Call key, or press Exit.
--End--
View the server IP address
Follow this procedure to view the IP address and port number of the call
server.
You cannot edit the IP address or port number.
Prerequisites
The handset must be in standby mode.
Procedure Steps
Step Action
1 Perform one of the following options:
•
press and hold the LINE key, the User Options menu
appears, or
• while the handset is in standby state, press the Cfg soft key,
highlight System Information.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.