Nortel Networks NN10042-116 - Manual (Page 125)

WLAN Handset 6100 Series Desktop Charger 125
Attention: Do not place anything in the Desktop Charger other than
the WLAN Handset 6120 and 6140, you can damage the contacts. Bent
contacts can stop the charging of the handset.
Navigation
• "Single Desktop Charger" (page 125)
• "Dual Desktop Charger" (page 125)
• "Quad Desktop Charger" (page 126)
• Single Desktop Charger
Procedure Steps
Step Action
1 Press End to terminate any calls.
The handset can be off or in standby state during charging.
2 Place the handset, face forward, into the Desktop Charger.
An animated charge icon indicates that charging is in progress.
3 Charge the battery pack.
If the handset is in standby mode, it displays its extension
number and Charging. It is fully operational and can receive
calls.
If the handset is off, only Charging is displayed and the handset
cannot receive calls.
It is normal for the battery pack to become warm when charging.
4 When the handset is fully charged, Charge Complete is
displayed. Remove the handset from the charger.
--End--
Procedure Steps
Step Action
Dual Desktop Charger
Procedure Steps
Step Action
1 Press End to terminate any calls.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.