Nortel Networks NN10042-116 - Manual (Page 97)

Select Ring Options 97
12 Do one of the following:
• to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
--End--
Select Ring Tone
Procedure Steps
Step Action
1 While the handset is in the standby mode, press the Cfg soft key.
Attention: Ring Tone does not appear in the menu when Ring
Cadence is off.
2 Use the Nav keys to scroll to User Profiles.
3 Press Enter to select User Profiles. The next menu level is
displayed.
4 Use the Nav keys to scroll through the menu and highlight one of
the settings (an asterisk [*] indicates the selected/active setting).
5 Press Enter to select the option.
6 Use the Nav keys to scroll to Ring Tone.
7 Press Enter to select the option.
8 Use the Nav keys to select Telephone Ring.
9 Use the Nav keys to scroll through the menu and select Ring
Tone.
10 Press Enter to select the option.
11 Use the Nav keys to scroll through the list and to highlight one of
the following:
•
Tone 1 (default)
•
Tone 2
•
Tone 3
•
Tone 4
•
Tone 5
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.