Nortel Networks NN10042-116 - Manual (Page 66)

66 Make a call
Procedure Steps
Step Action
1 Press the MENU key.
The handset state changes from idle to the active/on-hook state.
2 Use the dialpad to enter the number you want to call.
The number appears in the display area.
3 Press OK to dial the number.
--End--
Editing the predial number
Follow this procedure to edit a previously entered predial number.
Procedure Steps
Step Action
1 Press the MENU key.
The handset state changes from idle to the active/on-hook state.
2 Perform one of the following steps.
•
To delete numbers that appear to the right of the cursor,
press Delete.
•
To delete numbers that appear to the left of the cursor, press
Bksp.
• To quit without editing a number, press Cancel.
3 Press Ok to dial the number.
--End--
Redial last number
Follow this procedure to use the Last Number Redial (Redl) feature on the
WLAN Handset 6100 Series. The Redial feature automatically redials the
last dialed number.
Procedure Steps
Step Action
1 Press the End button.
2 Press the Actv soft key.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.