Nortel Networks NN10042-116 - Manual (Page 96)

96 Using the User Option menu
— Ring Volume
— Vibrate Cadence
— Ring Delay (see Note 2)
• Message Alert 1 — reserved for future use.
• Message Alert 2 — reserved for future use.
Note 1: Ring Tone does not appear in the menu when Ring Cadence is
off.
Note 2: Ring Delay does not appear in the menu when Ring Cadence or
Vibrate Cadence is off.
Select Ring Cadence
Procedure Steps
Step Action
1 While the handset is in standby mode, select the Cfg soft key.
2 Use the Nav keys to scroll to User Profiles.
3 Press Enter to select User Profiles. The next menu level is
displayed.
4 Use the Nav keys to scroll through the menu and highlight one of
the settings. (an asterisk [*] indicates the selected/active setting).
5 Press Enter to select the option.
6 Use the Nav keys to scroll to Ring Settings.
7 Press Enter to select the option.
8 Use the Nav keys to select Telephone Ring.
9 Press Enter to select the option.
10 Use the Nav keys to scroll to Ring Cadence and select one of
the following:
•
Off
•
PBX (default)
•
Continuous
•
Short Pulse
•
Long Pulse
11 Press Enter to choose the cadence.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.