Select ring volume – Nortel Networks NN10042-116 User Manual
Page 98
98
Using the User Option menu
12
To play the highlighted setting, press Play.
13
Press Enter to choose the tone.
14
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
--End--
Select Ring Volume
Procedure Steps
Step
Action
1
While the handset is in the standby mode, press the Cfg soft key.
2
Use the Nav keys to scroll to User Profiles.
3
Press Enter to select User Profiles. The next menu level is
displayed.
4
Use the Nav keys to scroll through the menu and highlight one of
the settings. (an asterisk [*] indicates the selected/active setting).
5
Press Enter to select the option.
6
Use the Nav keys to scroll to Ring Setting.
7
Press Enter to select the option.
8
Use the Nav keys to select Ring Volume.
9
Press Enter to select the option.
10
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
--End--
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116
04.01
Standard
4 July 2008
Copyright © 2008 Nortel Networks
.