Nortel Networks OPTera Metro 3500 - Manual (Page 199)

Operation, administration, and maintenance (OAM) features 2-161
Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
Figure 2-51:
Site Manager Test Access Session Management window
EX1505p
Test Access Ports (TAPs)
Any supported circuit pack in slots 3 through 10 can be provisioned as the TAP
as long as it does not have any existing connections on it. Multiple test access
connections can be established on a TAP as long as the TAP has the bandwidth
available to carry all of the traffic.
The following facilities can be assigned as test access ports are DS1, DS3,
EC1, OC3, OC12, and OC-48. A facility and all its channel is reserved for Test
Access when its secondary state is set to test (TS).
The rates and path types that can be placed under test access are DS1, DS3,
VT1.5, STS1, STS3c, STS12c, STS24c and STS48c.
Note 1: E1 facilities path types are not supported.
Note 2: DS1 and VT1.5 rates are not supported on the STS managed
STX-192 circuit pack.