Nortel Networks OPTera Metro 3500 User Manual
Page 91
Operation, administration, and maintenance (OAM) features 2-53
Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
Linear point-to-point
A point-to-point configuration transports traffic between two sites on a
protected OMX DWDM system. Two fiber spans between the sites in a
DWDM point-to-point configuration have the same functionality as up to 32
fiber spans in a non-DWDM point-to-point configuration. An OMX shelf is
required at both sites. The fiber connects to the OTS OUT on the OMX module
at one site, and the OTS IN on the OMX module at the other site. See
for an example of a point-to-point configuration for four channels.
Figure 2-28
DWDM point-to-point configuration
EX0811a
Physical Connections
Logical Connections
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
OMX
OMX
OMX
OMX