Nortel Networks OPTera Metro 3500 - Manual (Page 327)

Hardware feature descriptions 3-99
Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
If a 4x100BT, 4x100FX, 2x100BT-P2P or 2xGigE/FC-P2P circuit pack is
inserted into an odd slot (n
odd
), then you can only insert one of the following
circuit packs into the odd slot (n
odd
+1):
• 2x100BT-P2P
• 4x100BT
• 4x100FX
• 2xGigE/FC-P2P
If a 4x100BT, 4x100FX, 2x100BT-P2P or 2xGigE/FC-P2P circuit pack is
inserted into an even slot (n
even
), then you can only insert one of the following
circuit packs into the odd slot (n
even
-1):
• 2x100BT-P2P
• 4x100BT
• 4x100FX
• 2xGigE/FC-P2P
Note: There is no equipment protection for 2xGigE/FC-P2P circuit packs.
The 2xGigE/FC-P2P circuit packs supports two SFP optic modules. Each SFP
module is offered in either short reach (SX, NTTP51AA), long reach (LX,
NTTP51BD) and extended reach (ZX, NTTP51DZ) range. A dust cap
(A0512434) is required for any unequipped port.
Note 1: Support with VTX-series or STX-192 circuit packs in slots 13 and
14.
Note 2: The 2xGigE/FC-P2P circuit pack is shipped with two dust caps
(A0512434).
See Table 3-3 on page 3-6 for operational temperature ranges and operating
distances.