NETGEAR 7000 Series Managed Switch User Manual
Page 103
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs)
9-27
v1.0, May 2008
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 24.
•
In the IP Address field, enter 192.168.24.1.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e.
Click Apply to save VLAN 24.
2. Create VLAN 48 with IP address 192.168.48.1:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 48.
•
In the IP Address field, enter 192.168.48.1.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress
packet is untagged for the port.
Figure 9-24