NETGEAR 7000 Series Managed Switch - Manual (Page 94)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
9-18 Access Control Lists (ACLs)
v1.0, May 2008
12. Apply ACL 102 to port 44:
a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A
screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
• Select 102 from the ACL ID pulldown menu.
• In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display.
d. Click on the gray box under port 44. A flag appears in the box.
e. Click Apply to save the settings.
Figure 9-16