Example #3: transport output telnet, Example #4: session-limit and session-timeout – NETGEAR 7000 Series Managed Switch User Manual

Page 147

Advertising
background image

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Outbound Telnet

16-3

v1.0, May 2008

Example #3: transport output telnet

Example #4: session-limit and session-timeout

(Netgear Switch Routing) (Config)#lineconfig ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Config)#lineconfig

(Netgear Switch Routing) (Line)#transport ?

input Displays the protocols to use to connect to a

specific line of the router.

output Displays the protocols to use for outgoing

connections from a line.

(Netgear Switch Routing) (Line)#transport output ?

telnet Allow or disallow new telnet sessions.

(Netgear Switch Routing) (Line)#transport output telnet ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Line)#transport output telnet

(Netgear Switch Routing) (Line)#

(Netgear Switch Routing) (Line)#session-limit ?

<0-5> Configure the maximum number of outbound telnet sessions

allowed.

(Netgear Switch Routing) (Line)#session-limit 5

(Netgear Switch Routing) (Line)#session-timeout ?

<1-160> Enter time in minutes.

(Netgear Switch Routing) (Line)#session-timeout 15

Advertising