NETGEAR 7000 Series Managed Switch User Manual
Page 206
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
26-4
802.1x Port Security
v1.0, May 2008
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 100.
•
In the IP Address field, enter 192.168.100.1.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display:
d. Click the gray box under port 1 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e.
Click Apply to save VLAN 100.
2. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to
the following displays.
b. Under IP Configuration, make the following selections:
•
Next to Routing Mode, select the Enable radio button.
•
Next to IP Forwarding Mode, select the Enable radio button.
c.
Click Apply to enable IP Routing.
Figure 0-1