NETGEAR 7000 Series Managed Switch - Manual (Page 97)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs) 9-21
v1.0, May 2008
3. Create VLAN 200 with IP address 192.168.200.2/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 200.
• In the IP Address field, enter 192.168.200.2.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 200.
Figure 9-19