NETGEAR 7000 Series Managed Switch - Manual (Page 104)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
9-28 Access Control Lists (ACLs)
v1.0, May 2008
e. Click Apply to save VLAN 48.
3. Create VLAN 38 with IP address 10.100.5.34:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 38.
• In the IP Address field, enter 10.100.5.34.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 38 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 38.
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to
the following displays.
Figure 9-25