Example #2: show sntp client, Example #3: show sntp server, Example #4: configure sntp – NETGEAR 7000 Series Managed Switch User Manual

Page 154

Advertising
background image

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

18-2

Simple Network Time Protocol (SNTP)

v1.0, May 2008

Example #2: show sntp client

Example #3: show sntp server

Example #4: Configure SNTP

Netgear switches do not have a built-in real-time clock. However, it is possible to use SNTP to get
the time from a public SNTP/NTP server over the Internet. You may need permission from those
public time servers. The following steps configure SNTP on the switch:

(Netgear Switch Routing) #show sntp client

Client Supported Modes: unicast broadcast

SNTP Version:

4

Port:

123

Client Mode:

unicast

Unicast Poll Interval: 6

Poll Timeout (seconds): 5

Poll Retry:

1

(Netgear Switch Routing) #show sntp server

Server IP Address:

81.169.155.234

Server Type:

ipv4

Server Stratum:

3

Server Reference Id:

NTP Srv: 212.186.110.32

Server Mode:

Server

Server Maximum Entries: 3

Server Current Entries: 1

SNTP Servers

------------

IP Address:

81.169.155.234

Address Type:

IPV4

Priority:

1

Version:

4

Port:

123

Last Update Time:

MAY 18 04:59:13 2005

Last Attempt Time:

MAY 18 11:59:33 2005

Last Update Status:

Other

Total Unicast Requests: 1111

Failed Unicast Requests: 361

Advertising